Busch 59995 MM Progress K 142 Threshing Machine

The pin narrow threshing machine K 142 with straw shredder from 1952 was manufactured in the VEB Progress, combine for harvesting machines in Neustadt / Saxony. The threshing machines were designed for farms according to the motto "Enjoy working with progress machines". With a capacity of up to 750 KG / h, the K 142 simplified straw transport and therefore no longer even needed the twine that had been common until then. The drum with a diameter of 450 mm and a width of 660 mm had 8 rows of pins and another 5 rows of pins in the basket. After a long period of use, the crimp pins and knives of the tearing basket could be turned over because they could be used on both sides. This ensured that the straw was always completely torn and crushed.The power requirement was 10 kW (15 hp) and ensured a drum speed of 1200 rpm. The straw to be processed was fed to the shredding drum via the shaker. Due to the interchangeability of the squeeze and blind segments on the drum basket, different quality results could be achieved. The resulting torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds. The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires. The straw to be processed was fed to the shredding drum via the shaker.Due to the interchangeability of the squeeze and blind segments on the drum basket, different quality results could be achieved. The resulting torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds. The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires. The straw to be processed was fed to the shredding drum via the shaker. Due to the interchangeability of the squeeze and blind segments on the drum basket, different quality results could be achieved. The resulting torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds. The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires.Due to the interchangeability of the squeeze and blind segments on the drum basket, different quality results could be achieved. The resulting torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds. The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires. Due to the interchangeability of the squeeze and blind segments on the drum basket, different quality results could be achieved. The resulting torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds. The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires. torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds.The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires. torn straw could be blown up to 25 m using the integrated blower. At the end of the straw blowing line (diameter 120 mm) there was a rotating blow-out head. With him it was also possible to fill the last gable corner. The adjustable concave also made it possible to thresh legumes and seeds. The 6.10 meter long, 3.20 meter wide and 2.20 meter high solid steel thresher weighed an impressive 1600 kg. On request, it could be supplied with iron or air tires. 20 meters high solid steel threshers weighed 1600 kg. On request, it could be supplied with iron or air tires. 20 meters high solid steel threshers weighed 1600 kg. On request, it could be supplied with iron or air tires.The K 142 pin-type threshing machine with straw shredder and iron wheels has been lovingly reproduced on a scale of 1:87. The model, which is manufactured in 3D printing and assembled by hand, captivates with many special details. The straw blow pipe is included as a separate clip-on part, the corresponding fine filigree extensions are firmly shown on the roof of the miniature. Special attention should be paid to the drive wheels on both sides, whose delicate drive straps are attached as separate parts. The small but striking two-tone "progress" logo was applied to both sides of the threshing machine using the high-quality pad printing process.

59995